Waste lithium battery recycling machine equipment processing method

Release Time：2022-11-08 Source：Lithium Battery Recycling Machine Share：

       With the widespread use of tablets, laptops, cell phones, digital devices and other electronic products, these electronic products are updated and eliminated at an accelerating rate, due to strong demand, the production of lithium-ion batteries also showed a significant increase in the mass production and manufacturing of lithium batteries and the continuous upgrading of personal consumption has generated a staggering number of used lithium batteries. Some years ago, due to technical bottlenecks, the recycling rate of lithium-ion batteries is quite low, this situation has led to many used lithium-ion batteries are arbitrarily discarded disposal, which has caused a considerable threat to the environment and pollution, but also caused the loss of resources and waste.

　　Waste lithium battery recycling processing equipment using physical twin shaft shredder shredding, multi-knife crusher secondary crushing treatment. After crushing the waste lithium battery crushed material after vibration screening and then through the analysis machine to separate the waste lithium battery outer packaging plastic film and then have airflow sorting equipment for secondary sorting, in the whole process of sorting and separation and the subsequent process of dust by negative pressure extraction by pulse dust removal equipment for dust removal treatment. This constitutes a green battery life cycle, forming a closed-loop cycle system for lithium batteries.
 


　　Waste lithium battery recycling treatment equipment processing method: waste lithium battery materials through the conveyor equipment will be transported to the first level shredder for coarse crushing of materials. The coarse crushed material is sent to the second crusher by the conveyor for secondary crushing. After the second crushing of materials into the conveyor belt, in the process of conveying, the conveyor belt is set above the automatic magnetic separator. The process of conveying the material then separates the iron in the conveyed material. Material conveyor and magnetic separator will be selected iron, the material again for fine crushing machine crushing processing. After the crushing process, the material is formed into powder material. The powdered materials are separated by the negative pressure wind conveying system into the cyclone separator for screening, through the wind airflow separation device, air separator separation, different density of the material is layered, after sorting to get separated metal materials, non-metallic materials in the material by the negative pressure wind system pulse dust collector disposal.

　　Waste lithium battery recycling processing Machine equipment mainly selects the physical separation method, which has the characteristics of environmental protection, green sustainable development, no secondary pollution, with good economic and environmental benefits, the whole recycling process to achieve the automation of material separation, has the advantages of good recycling efficiency and strong processing capacity. Processing capacity of 500 kg per hour, 5000 tons per year of waste lithium battery waste sorting processing capacity. The recovery rate and utilization rate of effective resource components of waste lithium-ion batteries are above 90%.

To learn more about lithium battery recycling equipment, please pay attention to this site: https://www.lithiumbatterybroken.com/

Want to know more about the knowledge of lithium battery recycling machine, welcome to pay attention to this site, reproduced please specify the source: https://www.lithiumbatterybroken.com/company/90.htmlThank you!