Lithium battery recycling equipment a pollution-free lithium battery decompositi

Release Time：2022-10-31 Source：Lithium Battery Recycling Machine Share：

       Lithium battery is one of the batteries commonly used in electronic products, mainly divided into lithium metal battery and lithium ion battery, lithium metal battery is generally the use of manganese dioxide as the cathode material, lithium metal or its alloy metal as the cathode material, the use of non-aqueous electrolyte solution battery; lithium ion battery is generally the use of lithium alloy metal oxide as the cathode material, graphite as the cathode material, the use of non-aqueous electrolyte battery. Li-ion batteries are generally lithium alloy metal oxide materials, graphite as the negative electrode material, the use of non-aqueous electrolyte batteries, due to the large amount of lithium batteries, the rapid rate of replacement, so there will be a large number of waste lithium batteries, the decomposition of waste lithium batteries recycling become a concern.

      The shredder and crusher are connected to the pulse dust collector Ⅰ through a pipe, and the airflow separator is connected to the collector Ⅰ through the induced draft fan Ⅱ, and the collector Ⅰ is connected to the pulse dust collector Ⅰ, and the pulse dust collector Ⅰ is connected to an air purification device through the high pressure induced draft fan Ⅰ, and the analyzer The analyzer is connected to the second air cleaning device through collector II, pulse dust collector II, and high pressure induced draft fan II, which are connected to the second air cleaning device, and the shaking sieve is connected to collector III, and the grinder is connected to collector IV, and both collector III and collector IV are connected to pulse dust collector III, which is connected to the second air cleaning device through high pressure induced draft fan III.

      The first air purification device includes a spray tower Ⅰ connected to the high-pressure induced draft fan Ⅰ, and the spray tower Ⅰ is connected to the UV photolysis air purifier Ⅰ through the dryer Ⅰ, and the UV photolysis air purifier Ⅰ is connected to the induced draft fan Ⅰ.

 
      Lithium battery recycling equipment two air purification device includes spray tower Ⅱ connected with high pressure induced draft fan Ⅱ and high pressure induced draft fan Ⅱ, spray tower Ⅱ is connected with UV photolysis air purifier Ⅱ through dryer Ⅰ, UV photolysis air purifier Ⅱ is connected with induced draft fan Ⅲ. The shredder includes frame Ⅰ and shell Ⅰ located on frame Ⅰ, the upper end of shell Ⅰ is set with feed port Ⅰ, there are drive device Ⅰ on both sides of frame Ⅰ, there are rotary shaft Ⅰ and rotary shaft Ⅱ connected with drive device Ⅰ on both sides of shell Ⅰ, there are blades distributed circumferentially on rotary shaft Ⅰ and rotary shaft Ⅱ, there are spacers between adjacent blades, the blades on rotary shaft Ⅰ and rotary shaft Ⅱ are staggered, the lower end of shell Ⅰ is set with The lower end of the housing Ⅰ is provided with a discharge port Ⅱ.

      Set collector Ⅰ, collector Ⅱ, collector Ⅲ, collector Ⅳ, can collect dust in the process of sorting, analysis, sieving, reduce environmental pollution, improve energy utilization, set an air purification device and a second air purification device can purify the excluded air to avoid harmful gases into the ambient air; through the spray tower can absorb dust and large molecules of gas, through UV photolysis air The UV photolysis air purifier can decompose small molecules of harmful gases to further reduce air pollution.

Want to know more about the knowledge of lithium battery recycling machine, welcome to pay attention to this site, reproduced please specify the source: https://www.lithiumbatterybroken.com/industry/58.htmlThank you!